eo-3 Star of Bethlehem Point Assembly in Pictures

This post is basically the same as the prior one, but showing photographs of the assembly process.

First, pick the strips by the color list shown in the previous post.

Sew the strips together with a 2" (ideally) stagger between strips. The photo above shows how the strips were ironed.

The photo above shows the top side of the strips.

Clean up the edge by cutting the strips at a 45 degree angle from the long edge.

 

Cut the individual diamond strips by cutting the fabric every 2" from the edge.

Above shows the five categories of diamond strips in piles of 8 strips each.